Loading...

  •      

Electronic Hygrothermostat ETF012


¡ñTemperature and humidity adjustable
¡ñOptical operating display£¨LED£©
¡ñHIgh switching capacity
¡ñClip fixing

The electronic hygrotherm senses the ambient temperature and relative humidity in anenclosure with electric/electronic component£¬and turns on a heater£¨or alternatively£¬a fan£©ateither set point.helping prevent the formation of condensation in the enclosure.
The LEDintegrated in the adiustment knob on the active controller is lit when the connected devicelS in operation.


Technical Data
Switch differenco(temporature) 2K(¡À1K tolerance)at 25¡æ/77¡ãF(50%RH)
Switch difference(humidity) 4%RH(1%tolerance)at 25¡æ/77¡ãF(50%RH)
Reaction time(humidity) Approx.5sec.
Contact type Change-over contact(relay)
Contact resistance <10m¦¸
Service lifc NC:>50,000 cycles
  NO:>100,000 cycles
Maxswitching capacity(Relay output) NC:240VAC£¬6(1)A
  NO:240VAC£¬8(1.6)A
  NC:120VAC£¬61)A
  NO:120VAC. 8(1.6)A
  24VDC.4A
EMC Acc.to EN 55014-1-2£¬EN 61000-3-2.EN 61000-3-3
Optical indicator LED
Connection 5-pole terminal.clamping torque 0.5Nm max.:
  Rigid wire 2.5mm²
  Strandod wire(with wire end ferrule)1.5mm²
Mounting Clip for 35mmDIN rail£¬EN50022
Casing Plastic according to UL94V-0.light grey
Dimensions 77¡Á60x43mm
Weight Approx.0.20kg
Fitting position Vertical
Operating/Storage temperature 0 to+60¡æ(+32 to+140¡ãF)-20 to+800C(-4 to+176¡ãF)
Protection type IP20



Product selection



product name

product model

basic function

remarks

Electronic temperature controller

ETF012

The electronic thermostat can sense the temperature and relative humidity in the electrical box, open the heater (or replace it with a fan) at the setting point to prevent the generation of water inside the box, and the LED screen at the working time knob of the connection device will be on.

Length * width * height 60 * 43 * 77

Online Message

*
*
*

Related Products

See More