Code	Input signal	Distribution voltage
1	4-20mA field two-wire transmitter	24V

LP

Input surge protection

In: 5KA Imax: 10KA

●Power & alarm LED
●Input surge protection
●Programmable input & output ranges
●Three isolations (input/output/power)




Distribution voltage: 24V (30mA max drive current)
Output load: 0-500Ω
Response time: <0.05s (0~90%) (TYP)
Ripple: <10mVrms
Transmission errors: 0.1% of the final value
Temperature coefficient: Measured value of
15ppm/K/a load of 100Ω
Compressive strength: 100MΩ+ for 1500VAC/min
under the condition of 2500VDC
Electromagnetic compatibility: Conforms to
GB/T18268 industry equipment application
requirement (equivalent to IEC61326-1)
Operation temperature: -25℃~+85℃
Operation humidity: <90%RH (no condensate water)
Power: 24VDC±10%
Consumption power: <1W
Housing material: Flame retardant for ABS
Weight: about 90g
Dimensions: 12.5x106x112mm (TxWxH)


Max continuous operation voltage: 30VDC
Rated discharge current: In：5KA (line to ground,line to line)
Max discharge current Imax: 10KA (line to ground)
Standard: GB/T18802.21-2004


1． The 6 pin terminal of the instrument must be grounding under surge protection
2． Adopt separable wiring terminal for user convenience
3． Wire cross-section area around 0.5mm²～2.5mm²
4． 8mm bare wire, tighten with M3 screw