Loading...
¡ñTemperature and humidity adjustable
¡ñOptical operating display£¨LED£©
¡ñHIgh switching capacity
¡ñClip fixing
The electronic hygrotherm senses the ambient temperature and relative humidity in anenclosure with electric/electronic component£¬and turns on a heater£¨or alternatively£¬a fan£©ateither set point.helping prevent the formation of condensation in the enclosure.
The LEDintegrated in the adiustment knob on the active controller is lit when the connected devicelS in operation.
| Technical Data | |
| Switch differenco(temporature) | 2K(¡À1K tolerance)at 25¡æ/77¡ãF(50%RH) |
| Switch difference(humidity) | 4%RH(1%tolerance)at 25¡æ/77¡ãF(50%RH) |
| Reaction time(humidity) | Approx.5sec. |
| Contact type | Change-over contact(relay) |
| Contact resistance | <10m¦¸ |
| Service lifc | NC:>50,000 cycles |
| NO:>100,000 cycles | |
| Maxswitching capacity(Relay output) | NC:240VAC£¬6(1)A |
| NO:240VAC£¬8(1.6)A | |
| NC:120VAC£¬61)A | |
| NO:120VAC. 8(1.6)A | |
| 24VDC.4A | |
| EMC | Acc.to EN 55014-1-2£¬EN 61000-3-2.EN 61000-3-3 |
| Optical indicator | LED |
| Connection | 5-pole terminal.clamping torque 0.5Nm max.: |
| Rigid wire 2.5mm² | |
| Strandod wire(with wire end ferrule)1.5mm² | |
| Mounting | Clip for 35mmDIN rail£¬EN50022 |
| Casing | Plastic according to UL94V-0.light grey |
| Dimensions | 77¡Á60x43mm |
| Weight | Approx.0.20kg |
| Fitting position | Vertical |
| Operating/Storage temperature | 0 to+60¡æ(+32 to+140¡ãF)-20 to+800C(-4 to+176¡ãF) |
| Protection type | IP20 |
|
product name |
product model |
basic function |
remarks |
|
|
Electronic temperature controller |
ETF012 |
|
The electronic thermostat can sense the temperature and relative humidity in the electrical box, open the heater (or replace it with a fan) at the setting point to prevent the generation of water inside the box, and the LED screen at the working time knob of the connection device will be on. |
Length * width * height 60 * 43 * 77 |