Intelligent dehumidification device is the use of semiconductor refrigeration dehumidification mode, the closed space of the wet air in the fan under the action of the fan, the air water vapor through the semiconductor refrigeration mechanism after condensing into water, and then eliminate the cabinet through the guide pipe, can achieve a good dehumidification effect.
Cooling type: F01 is set at 0. Meanwhile, the dehumidification device is automatically started when the ambient humidity is below the lowest humidity value (humidity setting value minus the humidity return value).When the ambient temperature is higher than the set temperature maximum value (the temperature setting value), the fan heat dissipation begins to start, and when the temperature is below the set temperature value (the temperature setting value minus the temperature return value), the cooling fan stops working.
Heat up type: When F01 sets 1, when the ambient temperature is below the set minimum temperature value (temperature setting value), the temperature starts to start, when the temperature is higher than the highest temperature value (temperature setting value plus temperature return value) temperature increase stops.The humidity value is condensed and set. When the ambient humidity is higher than the set humidity maximum (set humidity), the dehumidification is stopped when the lowest humidity, the dehumidifier until the function is turned off manually.
Anti-frost icing function: monitor the working surface temperature of condensation surface in real time to prevent the temperature of condensation surface from freezing and frost during dehumidification work, and affect the drainage effect.
Air circulation function: the temperature and humidity of various parts of the air static state in the cabinet are different. The dehumidifier provides the air circulation function in the cabinet, so that the temperature and humidity in each position in the cabinet are more average, and can more effectively monitor the humidity and ambient temperature in the air in the cabinet.

input specification	The 1-way temperature and humidity input module	working power supply	AC/DC 85-260V
measuring range	Temperature: -40℃ -120℃; humidity: 5%RH-95%RH	Product power	Power is 60W at starting the dehumidification
resolving power	Temperature was 0.1℃, and the humidity was 1%RH	work environment	Corcorrosive with temperature 0-50℃, humidity 85%RH
control method	stepping control	intrinsic error
Output specification	1 relay output, 250VAC / 3A or 30VDC / 3A		Humidity: ± 3%RH (10%RH-90%RH), ± 5%RH (0%RH-99%RH)

3.1. Controller wiring and dimension diagram

Temperature and humidity sensing dimension diagram:

product name	product model	basic function		remarks
Mini-type intelligent dehumidification loading penalty	CHTK-CS8000		Intelligent dehumidification device for flame-retardant plastic shell Heating power: 50-500W Humidity detection range: 20%RH-98%RH; Deval efficiency: 450ml / day (20W35℃ RH=80% working condition)	High * wide * deep 87mm*71mm*51mm
Plastic type intelligent dehumidification installation penalty	CHTK-CS800		Heating power: 50-500W Humidity detection range: 20%RH-98%RH; Removal efficiency: 450ml / day (60W35℃, RH=80% working condition)	High * wide * deep 87mm*71mm*51mm
Plate and gold type intelligent dehumidification installed Shu	CHTK-CS810			High * wide * deep 87mm*71mm*51mm
Aluminum alloy type intelligent dehumidification device	CHTK-CS820			High * wide * deep 87mm*71mm*51mm
Stainless steel type intelligent dehumidification pack slang	CHTK-CS830			High * wide * deep 87mm*71mm*51mm